Air conditioner symbols vary per brand, family, and type of air conditioner. Air conditioners’ basic functions are “on”/”off”, “cooling”/”heating”, and most importantly the desired room temperature. Air conditioning symbols may also show the level of control of an air conditioner’s speed (low/medium/high). Air conditioning symbols for room temperature controlling look like this:
Air conditioning symbols can be circular, horizontal, vertical or combinations thereof depending on the manufacturer. Air conditioners that control both heating and cooling use symbols like these:
Common Air Conditioning Symbols:
– High Heat (Loud Air)
– High Cool (Dry Air)
– Medium Heat (Moderate Air)
– Low Heat (Quiet Air)
– Low Cool (Humid Air)
For more specific questions, call your local air conditioning company to find out what type of air conditioner you have and how it works properly. If you are still unsure, consult your manual. Air conditioners are not complicated devices once they are broken down into their individual parts – there is no need to worry.
An Aircon Units Definition: An air conditioner unit is a machine that controls humidity and temperature by cooling air.
Several symbols may be found on an air conditioner remote control. Here is a little bit of information about some of them:
Fan Symbol
The fan symbol has come to be the universal symbol used to indicate cooling or forced-air heating. If pressed continuously, it will turn the fan setting on or off, depending upon its current status.
Temperature Setting Symbol
This temperature symbol is usually accompanied by Air Conditioning Remote Symbols Settings Air Conditioning. If this button is pressed repeatedly it will allow the user to select an operating temperature higher or lower than the current temperature setting.
When you’re searching for the symbols found on your air conditioning remote control, it’s important to remember that every remote is different. Several common symbols appear on most remotes but there may be others that are specific to your model of the air conditioner.
Typically, the symbols for heat mode and cool mode are fairly straightforward. Heat mode is represented by an icon of the sun or hot water bottle while the cool mode is shown through an icon depicting a snowflake or ice crystal.
External fan speed settings have icons with numbers ranging from 1 to 7, which indicate high, medium and low speeds respectively. Newer models do away with this numbering system in favour of simply showing three types of fan speeds: normal, natural or silent.
To activate the heat, you must press the Heat Mode button once to put your air conditioner in Heat mode. Pressing this button again will change Heat mode back to Cool mode. If you press and hold this Heat Mode button for 5 seconds, the air conditioner will stop cooling until you release Heat mode. This prevents any damage from occurring if you forget that Heat mode is activated.
Similarly, pressing the Cool Mode button puts your air conditioner into Cool mode and another press changes it back to Heat or Off modes. You can also switch between Heat and Cool modes by holding down the Air swing button until the appropriate icon appears on the screen. The Fan Speed buttons allow you to choose an external fan speed without having to go through all available settings each time. The Heat mode, Cool mode and Air Swing buttons have symbols with specific meanings as described above, but Fan Speed buttons do not.
There are several other air conditioner unit symbols on the remote that may have different operation modes from model to model. Not all remotes have a Timer button or Display button so if you don’t see it on your own model then that’s okay. Other common symbols you’ll find include an up arrow for increasing settings and a down arrow for decreasing them. If you’re unsure about what a particular symbol means, refer to the user manual that came with your air conditioning unit.
You’ll need to know about Heat pump mode and Cool modes to operate your air conditioning unit safely. Heat mode is represented by an icon depicting either the sun or hot water bottle while Cool mode is shown through an icon depicting a snowflake or ice crystal. The Heat mode, Cool mode and Air Swing buttons have symbols with specific meanings as explained above but Fan Speed buttons do not. There are several other buttons on the remote that may have different functions from model to model. Not all remotes have a Timer button or Display button so if you don’t see it on your own model then that’s okay.
Other common symbols you’ll find include an up arrow for increasing settings and a down arrow for decreasing them. Also, you might find a silent mode, sleep mode, air direction button, dry mode buttons depending on the brand you are using.
How to Set the AC unit on Heat Mode?
Many people often forget that their air conditioner has a heat mode function. Before you start using your air conditioner on heat mode, it is necessary to understand its heating capacity and blower speed for different heating modes. Vertical air swing can also affect the performance of an AC unit.
Vertical air swing is especially effective in increasing warm-air circulation during winter months or cold weather conditions by pushing hot air downwards, reducing hot spots near ceiling areas without having to lower room temperature. It can increase the airflow velocity to achieve faster recovery after defrosting windows.
Vertical air swing will also reduce humidity levels (and the likelihood of condensation) on cooler windows and wall surfaces by drawing colder outside air into homes that are poorly insulated or not insulated at all. This move thus increases the rate of heat transfer by increasing airflow, replacing moist air with dry air to reduce the chances of condensation and mould growth
An AC also has a Cooling mode and Quiet mode that you can easily set when needed. Cooling mode is mainly for summer seasons or hot weather conditions while Quiet mode helps in setting different custom speeds for airflow circulation at home – it is usually used when sleeping, studying or resting.
When the colder months hit, you might be looking for ways to keep warm. One way is to use an appliance that can both cool and heat. Can an air conditioner function as a room heater?
An air conditioner has two main settings: cooling or heating. The AC button does not work as a mode to heat your room. However, the AC button can be used to turn on an air conditioning unit. If you want the main function of the room heater to be heating, then you need to take a look at other settings like ventilation mode or heat mode.
When using your air conditioner as a room heater, make sure the setting is set to Heat Mode or ventilation mode. This should cause hot air to constantly come out of your vent nearest your thermostat. The blower speed may also affect how fast the room heats up. In an indoor unit, some people might be worried about the fan noise. However, your air conditioning unit can be set to automatically adjust the setting when necessary.
Essential Air Conditioner Symbols Setting?
Setting the desired temperature, activating a cold or cooling mode, and giving feedback to the user is very important for an air conditioner. The symbols that engineers use can seem “mumbo-jumbo” to those who just want their home/office to be cool as fast as possible.
Here are some common symbols used with an air conditioner:
- The desired room temperature: this is the target temperature you want the room to be at. Use this if your air conditioner has a digital display and no remote control or buttons on the unit. If your device only has buttons on it, use this symbol instead:
- The current room temperature: This symbol lets you know what the room’s actual temperature is. You might notice that it’s different from the desired room temperature.
- On or off: This symbol tells you that your cooling system is activated. Some systems will have different modes, like fan only mode, cooling mode, and dehumidifying mode. Read on to learn what those mean.
- Airflow direction: The arrow indicates where the cool air will be blowing from; make sure it’s pointing at you! This can sometimes indicate the vertical air swing symbol
- Dehumidifies the air: This function isn’t found in all machines, but it can come in handy if you live in a very humid climate (obviously).
- Fan-only mode: This allows you to circulate already cooled air; useful for quickly moving cooled air around before letting it infiltrate into the rest of the house/building.
- Reverses the airflow: If you want the cold air to circulate in the opposite direction, switch this setting.
For more information about symbols and how they are used in appliances, check out the wiki page for basic symbols.
Get the Best Performance from Your Air-con
To get the best performance from your air-con, you need to know a little about how it operates. Air conditioners can be split into two main types: those with a ‘heat pump’ function and those without.
Heat pumps are always used for heating as well as cooling, so if you decide to go for this type of unit, bear in mind that its running costs will be higher than an AC without a heat pump. To cool your room effectively, the temperature difference between the inside and outside must be as small as possible. For example, if it’s 35⁰C outside but 45⁰C inside then the AC has a much harder job cooling your home than if both these figures were closer together.
To avoid this situation, it’s best to keep the temperature in your home around 20⁰C. If you want to save energy with your AC, just set the thermostat at 24⁰C and use fans or open windows for cooling – they’re still more effective than air-con in very high temperatures. Air-con also has its limitations in humid conditions. Here too, opening doors and windows with a fan are usually better than using an AC alone.
